FAAD2 is a decoder for a lossy sound compression scheme specified in MPEG-2 Part 7 and MPEG-4 Part 3 standards and known as Advanced Audio Coding (AAC).
![[Note]](../images/note.png)
Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.
Download (HTTP): https://github.com/knik0/faad2/archive/2.11.2/faad2-2.11.2.tar.gz
Download MD5 sum: 6a0ab532d81d9a528d08ab862bc4b637
Download size: 644 KB
Estimated disk space required: 9.6 MB
Estimated build time: 0.2 SBU
Sample AAC file: https://www.nch.com.au/acm/sample.aac (7 KB)
Install FAAD2 by running the following commands:
mkdir build &&
cd build &&
cmake -D CMAKE_INSTALL_PREFIX=/usr \
-D CMAKE_BUILD_TYPE=Release \
-D BUILD_SHARED_LIBS=ON \
.. &&
make
This package does not come with a test suite. However, basic functionality can be tested by decoding the sample AAC file:
./faad -o sample.wav ../../sample.aac
This should display a copyright message and the following information about the sample file:
sample.aac file info:
ADTS, 4.608 sec, 13 kbps, 16000 Hz
---------------------
| Config: 2 Ch |
---------------------
| Ch | Position |
---------------------
| 00 | Left front |
| 01 | Right front |
---------------------
Now play the result (requires the aplay program from the alsa-utils-1.2.13 package):
aplay sample.wav
aplay should identify
the file as Signed 16 bit Little
Endian, Rate 16000 Hz, Stereo, and you should hear some
piano notes.
Now, as the root user:
make install